|
Дата: 10.07.2024 г. - Цена: договорная Токарно-фрезерный центр DOOSAN PUMA 3100
2020 год выпуска.
Количество осей Simultan— 5.
Упиверсальная фрезерная головка, + револьверный магазин снизу.
Through Spindle Coolant, C axis & Milling, Y-axis, Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, B axis, Tooling, Remote Hand Wheel, USB Port, Swarf Conveyor, Spindle Probe, Hydraulic Power Work Steady
Control FANUC 31i Model B5
Bar Capacity 102mm
C axis 0.0001 degree
Chuck Size 305mm (12")
Maximum Cutting Diameter 660mm
Maximum Cutting Length 1540mm
Maximum workpiece weight 500kg/1000kg supported
Swing 660mm
Tailstock Body Travel 1562mm
Tailstock Taper MT #5
Rapid Feedrates XYZ: 48 x 36 x 48m/minute
Spindle Motor Power 30/25kW
Spindle Nose A2-11
Spindle Speed 3000rpm
Maximum Tool Diameter 90mm
Maximum Tool Diameter with Empty Adjacent Pockets 130mm
Maximum Tool Length 450mm
Maximum Tool Weight 12kg
Milling Motor Power 26/18.5/15kW
Milling RPM 12000rpm
Tool Change Capacity 40 Station
Tool Change Time (Chip to Chip) 7.8 seconds
Tooling Configuration CAPTO C6
B axis Travel +/-120 degrees (0.001 degree)
Number of Axis Controlled 5 Axis Simultaneous
X axis Travel 630mm
Y axis Travel +/-150mm
Z axis Travel 1585mm
Machine Dimensions 5700 x 3011 x 2761mm
Machine Weight 16300kg
|
