Волчок ФВП-130

Волчок ФВП-130 — фото 1
Воронеж
ooo-pkf-yupiter-f137741.promportal.su
Вязьмикин Андрей ООО ПКФ Юпитер
+79518712323
ooo-pkf-yupiter-f137741.promportal.su
Волчок марки ФВП-130 предназначен для измельчения бескостного жилованного мяса, мясной обрезы, мякотных субпродуктов, шпика, а также других видов пищевого сырья, охлажденных в естественных условиях до температуры от +0°С до +10°С, массой кусков не более 0,25 кг.

Технические характеристики:

Наименование параметра

Значение

Производительность техническая, кг/ч, не менее

1200

Вместимость бункера, л

70

Электродвигатель – номинальное напряжение, В

3N~(380±10%)

Род тока

Переменный

Мощность, кВт

7,5

Количество решеток, шт.

3

Внешний диаметр решетки, мм

130

Количество ножей, шт.

2

Высота выгрузки измельченного продукта, мм, не менее

750

Габариты изделия, мм, не более

длина х ширина х высота

1200 х 650 х 1300±30

Масса изделия, кг, не более

450

Год выпуска

2021Производитель: Собственное производство
07.05.2025

Другие объявления автора: Вязьмикин Андрей ООО ПКФ Юпитер

Куттер вакуумный ВК-125МЧ

Куттер вакуумный ВК-125МЧ

Куттеры вакуумные периодического действия предназначены для перемешивания и измельчения под вакуумом составных компонентов при изготовлении фарша всех видов колбас, сосисок и сарделек. ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ: Геометрическая вместимость чаши, м3 0,125 Номинальный коэффициент загрузки чаши 0,6-0,7 Давление среды в полости чаши при вакуумировании, Мпа (кгс/см2) 0,02 (0,2) Скорость резания (изменяется бесступенчато), м/с 5…93 Количество ножей в одном комплекте 6 Частота вращения чаши, об/мин (плавная регулировка) 4-19 Частота вращения диска выгружателя, об/мин 100 Частота вращения ножевого вала, об/мин * в режиме резания (плавная регулировка) * в режиме перемешивания (реверсирование привода) 300 - 3600 300 - 600 Высота куттера, мм * с поднятой вакуумной крышкой * с опущенной вакуумной крышкой (по выгружатель) 2500±50 2100±50 Наибольшая длина куттера (при исходном положении выгружателя), мм 2600 Ширина куттера, мм - с изгибом вакуумного рукава - без вакуумного рукава 1860*±50 1600 Габаритные размеры шкафа управления, мм * * - ширина (глубина) 2100±50 600 400 Масса, кг * шкафа управления * 200 2400 Загружаемое мясо должно иметь температуру не ниже -5°С в кусках не более 0,5 кгПроизводитель: Собственное производство

—
Воронеж
Волчок ФВП-105

Волчок ФВП-105

Волчок марки ФВП-105 предназначен для измельчения бескостного жилованного мяса, мясной обрезы, мякотных субпродуктов, шпика, а также других видов пищевого сырья, охлажденных в естественных условиях до температуры от +0°С до +10°С, массой кусков не более 0,2кг. Технические характеристики: Наименование параметра Значение Производительность техническая, кг/ч, не менее 800 Вместимость бункера, л 50 Электродвигатель – номинальное напряжение, В 3N~(380±10%) Род тока Переменный Мощность, кВт 5,5 Количество решеток, шт. 3 Внешний диаметр решетки, мм 105 Количество ножей, шт. 2 Высота выгрузки измельченного продукта, мм, не менее 750 Габариты изделия, мм, не более длина х ширина х высота 900 х 630 х 1250±30 Масса изделия, кг, не более 290 Год выпуска 2021Производитель: Собственное производство

—
Воронеж
FLEXOR CT Series – Single Die Cut

FLEXOR CT Series – Single Die Cut

FLEXOR CT Series – Single Die Cut - Heavy Duty Blank Label Machines which can be fitted with a Re-register module - Perfect solution for a fast and efficient blank label production of almost any kind - Up to 520mm web width available - Fully Servo Motor driven with Job Memory and build in IQ Market Segments: Retail Chemical Memjet Tickets Thermo Transfer Blanks Promotional material Logistics Food and beverage Label Types: SA paper and plastic labels Prize labels Blanks Thermo transfer Fully Servo Die Cutter – Slitter – Rewinder for the Labels Industry The Flexor CT Series is build for customers who demand quality, speed and efficiency. The CT Series works up to 300m/min and converts blank or pre-printed material with ease and speed. The Flexor CT Series Single Die has been designed to be able to cope with any kind of blank materials and is a highly versatile work horse. Quick, reliable, efficient means keeping the costs down and productivity up. Product features: Die Cutting - Single Die Cutting Unit for easy production of almost any label - Re-register can be added to any CT Series machine for a speed of up to 150m/min - Solid dies can be used in the die station - Rotometrics Hydrajacks pressure gauges can be fitted at any time Servo Technology / S-Drive - S-Drive machines will make your production lean, quick, reliable and ultra fast - Accurate tenstion control settings, automatic and safe slow down and start up for any label length - Online Diagnostics - Unlimited Job Memory Slitting - Cassette type slitting makes knife changes easy and quick - Slitting cassette exchangeable for shear cutting knives and razor knives - Set your knives outside the machine on a dedicated knife block which corresponds to the machine knife cassette - Slitting between two driven NIP Rollers makes it effortless and easy to setup allowing the operator to rewind lose rolls without compromosing slitting quality Flexo Printing - Optionally, up to two flexo printing stations can be added - Servo Driven Flexo Printing Unit for flood coating or inprint - Easy to change Print Cylinders - Turnbar available for reverse printing - Easy to adjust, very precise Rewinder - The Flexor CT Series offers you a single servo driven rewinder as a standard feature, it comes with a 76mm pneumatic shaft which is within second changeable to any size from 19mm – 152mm - Optional Double Rewinder for those tough jobs which cannot be rewound using just one rewinder - Optional Semi Turret speeds up the rewinding process significantly making the machine even more productive without investing into a full blown turret rewinder machine (see movie below) Added Value - Lamination Unit is optional and can be used inline for unspported or supported laminate - A digital strobe unit can be used to monitor die cutting accuracy - Inkjet numbering can be used inline to ensure more possibilities - Missing Label Detection, Flag, Splice and Matrix break detection sensors can be installed on the CT Series - Adjustable Rotometrics Accustrike Anvil - Underscorer from Rotometrics can be installed before die cutter

—
Москва
Film/Paper Cutting Machine Flexor 440B

Film/Paper Cutting Machine Flexor 440B

Film/Paper Cutting Machine Flexor 440B - Machines for inspecting, slitting, and rewinding film labels - Ideal solution for fast and efficient finishing - Web widths up to 520 mm available - Fully servo-driven machine with job memory Market Segments: Food and beverage Chemical Logistics Pharmaceutical Cosmetics Label Types: Wraparound Thermo transfer Linerless Offset paper Filmic Material BOPP Fully Servo Inspection – Slitter – Rewinder for the Labels Industry The Flexor BC Series is build for customers who demand quality, speed and efficiency. The BC Series works up to 300m/min and converts pre-printed material, films, monofilms and unsupported labelstock with ease and speed. The Flexor BC Monofilm has been designed to be able to cope with materials down to 10um and is a highly versatile work horse. Product features: Servo Technology / S-Drive - S-Drive machines will make your production lean, quick, reliable and ultra fast - Accurate tenstion control settings, automatic and safe slow down and start up for any label length - Online Diagnostics - Job Memory for up to 250 Jobs Build in IQ - All BC Series machines have build in counters for labels and meters/feet - A dedicated Counters screen shows the daily production, life time, run time, switch on time making job calculations easy and reliable - No more setting label lengths, the machine will automatically calculate it and adjust the start up and slow down ramps Slitting - Cassette type slitting makes knife changes easy and quick - Slitting cassette exchangeable for shear cutting knives and razor knives - Easy to set razor knife slitting box - Slitting between two driven NIP Rollers makes it effortless and easy to setup allowing the operator to rewind lose rolls without compromosing slitting quality Rewinder - The Flexor BC Series Film offers you a double servo driven rewinder as a standard feature, it comes with a 76mm pneumatic shaft which is within seconds changeable to any size from 25.4mm – 152mm - The rewinder comes equipped with lay-on rollers to ensure that your filmic material is rewound perfectly straight at any speed - Active Anti-static devices on each rewinder ensure that no unwanted electrostatics are found on the material Film Package The “film package” includes: - Pneumatic lay-on rollers on the rewinder - Active anti-static devices on each rewinder on on the unwinder - Grooved idle rollers so that no air is trapped underneath the filmic material - Stronger servo motors on the rewinder for a perfect tension - Sophisticated tension control settings for all filmic material - Razor Knife Module as standard

—
Москва
KBA Rapida RA105-6+L ALV2 CX

KBA Rapida RA105-6+L ALV2 CX

KBA Rapida RA105-6+L ALV2 CX Year 2004 Sheet Size:740 x 1050mm Impressions:246 million approx. P40 Version FAPC (Fully Automatic Plate Change) Colortronic Console Varidamp Ink Temperature Control Technotrans Beta c Alcosmart AZR Steel Plate in Feeder Auto Ink Roller Wash Auto Blanket Wash Auto Impression Cylinder Wash Anilox Coating Unit ALV2 Extended Delivery UV Dryer 5 x Interdeck Positions UV Drying 2 x Interdeck Cassettes UV Drying - End Of Press IR/Hot Air Dryer in Delivery Weko AP262 Powder Spray Steel Plate in Delivery

—
Москва
Heidelberg CD 74-5P+LX (F)

Heidelberg CD 74-5P+LX (F)

Heidelberg CD 74-5P+LX (F) Year 2006 Perfecting:5+0/2+3 Sheet Size:605 x 740mm Impressions: 45 million approx. Autoplate Preset Plus Feeder Preset Plus Delivery CP2000 Center Axis Control Alcolor Vario Dampening Ink Temperature Control Water Cooled (With Heat Exchanger) Non - Stop Feeder Auto Ink Roller Wash Auto Blanket Wash Auto Impression Cylinder Wash Anilox Coating Unit IR Dryer (Heidelberg) Extended Delivery - X2 Non-stop Delivery Weko AP232 Powder Spray

—
Москва
Multitec S2-450-8

Multitec S2-450-8

Multitec S2-450-8 Yeah 2023 flexoprinting machine S2 – 450 web width Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 6 LED Drying cassettes (GEW) 2x hot air drying (at printing unit 1+8) Print speed max. 150 m/min Printing unit lead +/- 4 mm Die-cutting width 450 mm Die-cutting length from 304.8 mm to 609.6 mm Winding diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20 my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 printing cylinders 8 anilox cylinders 1 die cylinder 1 IEEC corona treatment (single-sided) 1 Meech web cleaning (double-sided) 2 die cutting units the machine is in operation since Sept 2023, max 650 hours Optional: 1x turning cross 1x delam/relam 1x 2 layer label system and lamination 8x UV cassette drying GEW system (if you dont want the LED dryer, we can also exchange with UV dryer)

—
Москва