Термоконтейнер для вторых блюд Kocateq A03FH 6xGN1/1

Термоконтейнер Kocateq A03FH 6xGN1/1 дает возможность предприятиям общественного питания, не полностью загруженным в дневное время, работать в режиме фабрики-кухни, производящей готовые обеды для их последующей доставки в места непосредственной реализации (офисы, школы, банковские учреждения - везде, где инвестиции в создание собственной кухни нерентабельны или нет условий, позволяющих установить собственную кухню).
Особенности модели

* Термоконтейнер с фронтальной загрузкой и с нагревательным элементом, встроенным в дверь, объемом 90 л для поддержания пищи в течение 8 часов в нагретом состоянии (+85 оС).
* Корпус термопота из цельнолитой двухслойной конструкции из пищевого полиэтилена толщиной 3 мм с инжекцией пенополиуретана высокой плотности.
* Внутренние размеры 55*33,5*55 см.
* С отключенным нагревом, термоконтейнеры используются для хранения охлаждённых продуктов.
* Горизонтальная загрузка для размещения 6 гастроемкостей GN 1/1 глубиной 20,40, 65мм, и 2 гастроемкостей GN 1/1 глубиной 100,150 мм, 200мм.
* Направляющие по длинной стороне для форматов GN 1/1, GN 2/3, GN 1/2, GN 1/3 с глубиной от 20 до 200 мм.
* Цифровой контроллер для отслеживания температуры внутри контейнера.
* Дверь контейнера компенсационным клапаном и силиконовой прокладкой.
* Поверхности дна и направляющих закруглены для простой очистки.
* Складывающиеся ручки для переноски.
* Дополнительно поставляется тележка для перемещения (В02).
* Вес пустого контейнера 20 кг.
* Отлично сохраняет тепло и холод, идеально соответствуя требованиям стандартов HACCP.
* Термоустойчив, возможна мойка в посудомоечной машине до +80 ° C
* Закругленные углы и гладкая механически прочная поверхность для простой санитарной обработки.
* Сохранение температурных режимов транспортировки.
* Можно транспортировать продукты в температурном диапазоне от -40 ° C до +120 ° C.Производитель: Kocateq
Модель: A03FH 6xGN1/1
Гарантия: 12 мес.
Время поддержания температуры: 8 часов
Назначение: Для вторых блюд
Тип установки: Напольный
Объем (л): 90
Температурный режим, °C: От -40 до +120
Количество емкостей: 6
Материал корпуса: Полиэтилен
Форма: Прямоугольная
Размер гастроемкостей (мм): GN 1/1
Внутренние размеры: 550х335х550
Вместимость гастроемкостей: 6
Глубина гастроемкости, мм: 20, 40, 65, 100, 150, 200
Тип загрузки: Фронтальная
Ширина (см): 69.5
Глубина (см): 42.5
Высота (см): 62
Вес, кг: 20
Ширина упаковки (см): 70.5
Глубина упаковки (см): 63.5
Высота упаковки (см): 74
Вес (с упаковкой), кг: 21.5
Страна производства: Южная Корея
04.05.2025

Другие объявления автора: Марат СТАНДАРТ-ГРУПП

Makeblock соревновательное поле 2022 MakeX Explorer Arena

Makeblock соревновательное поле 2022 MakeX Explorer Arena

Вы можете купить или заказать Makeblock соревновательное поле 2022 MakeX Explorer Arena у продавца СТАНДАРТ-ГРУПП ( Москва )Производитель: Makeblock Производитель: Makeblock Тип: Робототехнический набор Назначение: Для соревнований

112 400 руб.
Москва
Подставка под монитор ThunderX3 AS5 (ThunderX3 AS5)

Подставка под монитор ThunderX3 AS5 (ThunderX3 AS5)

Вы можете купить или заказать Подставка под монитор ThunderX3 AS5 (ThunderX3 AS5) у продавца СТАНДАРТ-ГРУПП ( Москва )Производитель: Thunder X3 Производитель: ThunderX3 Устройство: Подставка Цвет: Черный Длина USB-кабеля подсветки: 1,8 м Максимальная нагрузка, кг: 10 кг Материал рамы: Сталь Материал столешницы: Сталь Подключение подсветки: USB-порт Подсветка: HEX-RGB Управление подсветкой: Да Ширина столешницы: 600 мм Интерфейс: 3 x USB 3.0 Габариты: 600 x 240 x 80 мм Вес: 1,8 кг Габариты (в упаковке): 675 x 305 x 135 мм Официальная гарантия: 1 год

Москва
Этикет-лента Fasson, полуглянец, 58 x 30 мм, 920 шт.

Этикет-лента Fasson, полуглянец, 58 x 30 мм, 920 шт.

Вы можете купить или заказать Этикет-лента Fasson, полуглянец, 58 x 30 мм, 920 шт. у продавца СТАНДАРТ-ГРУПП ( Москва )Производитель: Fasson Производитель: Fasson Тип: Этикет-лента Высота этикетки: 30 мм Диаметр втулки этикеток: 40 мм Количество этикеток в рулоне: 920 Тип материала: Полуглянец Ширина этикетки: 58 мм

Москва
Этикет-лента Fasson, термо, 58 x 40 мм, 700 шт.

Этикет-лента Fasson, термо, 58 x 40 мм, 700 шт.

Вы можете купить или заказать Этикет-лента Fasson, термо, 58 x 40 мм, 700 шт. у продавца СТАНДАРТ-ГРУПП ( Москва )Производитель: Fasson Производитель: Fasson Тип: Этикет-лента Высота этикетки: 40 мм Диаметр втулки этикеток: 40 мм Количество этикеток в рулоне: 700 Тип материала: Термо Ширина этикетки: 58 мм

300 руб.
Москва
QP ригели для календаря белые, 350 мм, 100 шт.

QP ригели для календаря белые, 350 мм, 100 шт.

Вы можете купить или заказать QP ригели для календаря белые, 350 мм, 100 шт. у продавца СТАНДАРТ-ГРУПП ( Москва )Производитель: QP Производитель: QP Цвет: Белый Длина: 350 мм Вес (в упаковке): 0,8 кг

900 руб.
Москва
QP ригели для календаря белые, 450 мм, 100 шт.

QP ригели для календаря белые, 450 мм, 100 шт.

Вы можете купить или заказать QP ригели для календаря белые, 450 мм, 100 шт. у продавца СТАНДАРТ-ГРУПП ( Москва )Производитель: QP Производитель: QP Цвет: Белый Длина: 450 мм Вес (в упаковке): 1 кг

1 100 руб.
Москва
FLEXOR CT Series – Single Die Cut

FLEXOR CT Series – Single Die Cut

FLEXOR CT Series – Single Die Cut - Heavy Duty Blank Label Machines which can be fitted with a Re-register module - Perfect solution for a fast and efficient blank label production of almost any kind - Up to 520mm web width available - Fully Servo Motor driven with Job Memory and build in IQ Market Segments: Retail Chemical Memjet Tickets Thermo Transfer Blanks Promotional material Logistics Food and beverage Label Types: SA paper and plastic labels Prize labels Blanks Thermo transfer Fully Servo Die Cutter – Slitter – Rewinder for the Labels Industry The Flexor CT Series is build for customers who demand quality, speed and efficiency. The CT Series works up to 300m/min and converts blank or pre-printed material with ease and speed. The Flexor CT Series Single Die has been designed to be able to cope with any kind of blank materials and is a highly versatile work horse. Quick, reliable, efficient means keeping the costs down and productivity up. Product features: Die Cutting - Single Die Cutting Unit for easy production of almost any label - Re-register can be added to any CT Series machine for a speed of up to 150m/min - Solid dies can be used in the die station - Rotometrics Hydrajacks pressure gauges can be fitted at any time Servo Technology / S-Drive - S-Drive machines will make your production lean, quick, reliable and ultra fast - Accurate tenstion control settings, automatic and safe slow down and start up for any label length - Online Diagnostics - Unlimited Job Memory Slitting - Cassette type slitting makes knife changes easy and quick - Slitting cassette exchangeable for shear cutting knives and razor knives - Set your knives outside the machine on a dedicated knife block which corresponds to the machine knife cassette - Slitting between two driven NIP Rollers makes it effortless and easy to setup allowing the operator to rewind lose rolls without compromosing slitting quality Flexo Printing - Optionally, up to two flexo printing stations can be added - Servo Driven Flexo Printing Unit for flood coating or inprint - Easy to change Print Cylinders - Turnbar available for reverse printing - Easy to adjust, very precise Rewinder - The Flexor CT Series offers you a single servo driven rewinder as a standard feature, it comes with a 76mm pneumatic shaft which is within second changeable to any size from 19mm – 152mm - Optional Double Rewinder for those tough jobs which cannot be rewound using just one rewinder - Optional Semi Turret speeds up the rewinding process significantly making the machine even more productive without investing into a full blown turret rewinder machine (see movie below) Added Value - Lamination Unit is optional and can be used inline for unspported or supported laminate - A digital strobe unit can be used to monitor die cutting accuracy - Inkjet numbering can be used inline to ensure more possibilities - Missing Label Detection, Flag, Splice and Matrix break detection sensors can be installed on the CT Series - Adjustable Rotometrics Accustrike Anvil - Underscorer from Rotometrics can be installed before die cutter

Москва
Film/Paper Cutting Machine Flexor 440B

Film/Paper Cutting Machine Flexor 440B

Film/Paper Cutting Machine Flexor 440B - Machines for inspecting, slitting, and rewinding film labels - Ideal solution for fast and efficient finishing - Web widths up to 520 mm available - Fully servo-driven machine with job memory Market Segments: Food and beverage Chemical Logistics Pharmaceutical Cosmetics Label Types: Wraparound Thermo transfer Linerless Offset paper Filmic Material BOPP Fully Servo Inspection – Slitter – Rewinder for the Labels Industry The Flexor BC Series is build for customers who demand quality, speed and efficiency. The BC Series works up to 300m/min and converts pre-printed material, films, monofilms and unsupported labelstock with ease and speed. The Flexor BC Monofilm has been designed to be able to cope with materials down to 10um and is a highly versatile work horse. Product features: Servo Technology / S-Drive - S-Drive machines will make your production lean, quick, reliable and ultra fast - Accurate tenstion control settings, automatic and safe slow down and start up for any label length - Online Diagnostics - Job Memory for up to 250 Jobs Build in IQ - All BC Series machines have build in counters for labels and meters/feet - A dedicated Counters screen shows the daily production, life time, run time, switch on time making job calculations easy and reliable - No more setting label lengths, the machine will automatically calculate it and adjust the start up and slow down ramps Slitting - Cassette type slitting makes knife changes easy and quick - Slitting cassette exchangeable for shear cutting knives and razor knives - Easy to set razor knife slitting box - Slitting between two driven NIP Rollers makes it effortless and easy to setup allowing the operator to rewind lose rolls without compromosing slitting quality Rewinder - The Flexor BC Series Film offers you a double servo driven rewinder as a standard feature, it comes with a 76mm pneumatic shaft which is within seconds changeable to any size from 25.4mm – 152mm - The rewinder comes equipped with lay-on rollers to ensure that your filmic material is rewound perfectly straight at any speed - Active Anti-static devices on each rewinder ensure that no unwanted electrostatics are found on the material Film Package The “film package” includes: - Pneumatic lay-on rollers on the rewinder - Active anti-static devices on each rewinder on on the unwinder - Grooved idle rollers so that no air is trapped underneath the filmic material - Stronger servo motors on the rewinder for a perfect tension - Sophisticated tension control settings for all filmic material - Razor Knife Module as standard

Москва
KBA Rapida RA105-6+L ALV2 CX

KBA Rapida RA105-6+L ALV2 CX

KBA Rapida RA105-6+L ALV2 CX Year 2004 Sheet Size:740 x 1050mm Impressions:246 million approx. P40 Version FAPC (Fully Automatic Plate Change) Colortronic Console Varidamp Ink Temperature Control Technotrans Beta c Alcosmart AZR Steel Plate in Feeder Auto Ink Roller Wash Auto Blanket Wash Auto Impression Cylinder Wash Anilox Coating Unit ALV2 Extended Delivery UV Dryer 5 x Interdeck Positions UV Drying 2 x Interdeck Cassettes UV Drying - End Of Press IR/Hot Air Dryer in Delivery Weko AP262 Powder Spray Steel Plate in Delivery

Москва
Heidelberg CD 74-5P+LX (F)

Heidelberg CD 74-5P+LX (F)

Heidelberg CD 74-5P+LX (F) Year 2006 Perfecting:5+0/2+3 Sheet Size:605 x 740mm Impressions: 45 million approx. Autoplate Preset Plus Feeder Preset Plus Delivery CP2000 Center Axis Control Alcolor Vario Dampening Ink Temperature Control Water Cooled (With Heat Exchanger) Non - Stop Feeder Auto Ink Roller Wash Auto Blanket Wash Auto Impression Cylinder Wash Anilox Coating Unit IR Dryer (Heidelberg) Extended Delivery - X2 Non-stop Delivery Weko AP232 Powder Spray

Москва
Multitec S2-450-8

Multitec S2-450-8

Multitec S2-450-8 Yeah 2023 flexoprinting machine S2 – 450 web width Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 6 LED Drying cassettes (GEW) 2x hot air drying (at printing unit 1+8) Print speed max. 150 m/min Printing unit lead +/- 4 mm Die-cutting width 450 mm Die-cutting length from 304.8 mm to 609.6 mm Winding diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20 my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 printing cylinders 8 anilox cylinders 1 die cylinder 1 IEEC corona treatment (single-sided) 1 Meech web cleaning (double-sided) 2 die cutting units the machine is in operation since Sept 2023, max 650 hours Optional: 1x turning cross 1x delam/relam 1x 2 layer label system and lamination 8x UV cassette drying GEW system (if you dont want the LED dryer, we can also exchange with UV dryer)

Москва